overviewfeaturesreviewsmanuals
Front panel
  • Input
  • Drive Channel Voicing Switch:
    Gain, Master Volume, Treble, Middle, Bass
  • Clean Channel Voicing Switch:
    Volume, Treble, Middle, Bass
  • Reverb
  • Channel Select and Power Shift Select switches

Rear panel

  • Ground Switch
  • AC Input
  • Mains Fuse
  • Standby Switch
  • 16 ohm Speaker Jack
  • 4/8 ohm Impedance Selector
  • 4/8 ohm Speaker Output Jacks
  • Line out
  • Footswitch Jack
  • Loop Bypass Switch
  • Series/Parallel Switch
  • Loop Level Switch
  • Loop Level Control
  • Loop Return Jack
  • Loop Send Jack
  Features
  • Two channels
  • Switchable Voicing
  • Foot Switchable Boost
  • Power Shift™ (30W/18W Mode)
  • Accutronics Spring Reverb
  • Series/Parallel Variable Foot Switchable Effects Loop
  • Line Out
  • Baltic Birch Cabinet
  • Elephant Hide Charcoal Vinyl Covering
  • 12” Proprietary Speaker by Eminence

Power output

  • 30 Watts RMS (30W Mode)
  • 18 Watts RMS (18W Mode)

Impedance

  • Selectable 4 or 8 ohms with two parallel output jacks
  • 16 ohms with dedicated 16 ohm jack

Tube Complement

Four selected preamp tubes are accessible through a removable hatch on the brushed stainless steel front panel. Power, reverb drive and phase inverter tubes are accessible from the back of the chassis.

  • 1-12AX7 Tung-Sol (Russia)
  • 4-12AX7AC (China Selected)
  • 1-12AT7
  • 4-Premium Matched Sovtek EL84 Power Tubes
AccessoriesDealersArtistsSupportArticlesContactForum

©2009 Steven Fryette Design, Inc. All rights reserved.
Fryette Amplification is a registered trademark of Steven Fryette Design, Inc. 1201 South Flower Street, Burbank, California 91502